Peavey turns the Nashville 400 steel-guitar preamp into a compact Legacy Series pedal
The stompbox recreates the Nashville 400/112 circuit with its 1997 modifications, active EQ, Mid Shift and instrument-to-line output range.
· Edited by Peter Luha

Credit: Peavey (via source)
Peavey added the Nashville 400 Preamp Pedal to its Legacy Preamp Series in November, shrinking the clean preamp circuit of the Nashville 400 and Nashville 112 amplifiers into a die-cast stompbox. The design includes the 1997 circuit modifications and keeps the broad, clear response that made the original platform a reference point for pedal-steel players.
The control set mirrors an amplifier rather than a conventional overdrive. Pre Gain and Post Gain bracket an active three-band EQ, while Mid Shift moves the center of the midrange control and Presence shapes the upper response. An adjustable output spans instrument through line-level use, so the pedal can feed an amp input, a power amp or recording hardware without being locked to one gain structure.
Internally, the pedal derives a bipolar supply from a standard center-negative 9-volt adapter or battery and draws less than 100 mA. Peavey specifies hard bypass with an anti-click circuit, a fiberglass circuit board with two-ounce copper and plated-through holes, and independently tested EMC and FCC compliance. Those details matter for a device intended to replace a large clean preamp in a portable rig.
Although the Nashville name is inseparable from steel guitar, Peavey describes the circuit as full-range and suitable for any electric instrument. Guitarists seeking high-headroom clean tone, precise midrange placement or a direct preamp with substantial output flexibility now have that architecture without carrying the original combo.
Why it matters
The pedal makes a historically important clean steel-guitar preamp practical for modern pedalboards, direct rigs and players who need line-level headroom.
From Guitar News to Guitar Progress
Discover it here. Learn how it works. Practice it until it's yours.
“Play deliberately outside the key for 2 bars. Resolve back in. Make the listener feel both worlds.”
Related

Line 6 warns Helix, HX and POD Go users about unofficial NAM A2 firmware
The company says modified firmware can void the warranty, complicate future updates and leave hardware problems outside official support.

Schecter’s $499 E-1 Standard puts the angular classic into a stripped-down bolt-on build
The new E-1 Standard pairs a mahogany body and roasted-maple bolt-on neck with Schecter ’78 humbuckers in two finishes at $499.

Axion update adds onboard guitar-to-MIDI, VST instruments and LiveSPICE circuit imports
Severed’s November build turns Axion into an instrument host as Founders Edition units begin shipping to US wait-list customers.

Rik Emmett and Mojotone build Triumph-style gain, EQ and boost into the Rock & Roll Machine
The preamp pedal combines 50-watt Plexi-inspired drive with three-band shaping, Fat/Skinny voicing, an Oomph low-end switch and a solo boost.